energy efficiency

Conduct maximum demand survey with the PEL51

We’re all bound by our electronic devices for the better part of the day. But did you ever wonder how much electricity your devices actually consume? ???? Research suggests that the living room alone has small gadgets such as televisions, phones, tablets and/or gaming consoles that account for approximately 5% of our electricity bill, if not more. Get your hands on the PEL51 power and energy logger to conduct maximum demand or load surveys on single-phase installations. And look at navigating through energy savings in a domestic household. Drop us a message to learn more about the PEL51 range: cauk.tv/contact-us/

Get PEL103 – Portable Energy Logger to Monitor Power Consumption

Did you know? Good lighting, installation of occupancy sensors and other pieces of equipment are integral for any business, workspace or unit. By monitoring power consumption and procuring energy usage data recorded over time can help gain an overview of how the energy is being consumed by the electrical installation(s). And a tool such as PEL 103 power and energy logger helps monitor power consumption more accurately. 

Monitor Lighting Usage Proactively with C.A 1110

Given the energy crisis in the UK, it’s time to stay on top of energy consumption & bills! Modern light meters such as C.A 1110 help deliver & monitor adequate lighting whilst ensuring you see significant savings in electricity bills. Learn more about Chauvin Arnoux test and measurement equipment via our YouTube videos.

Taking the first steps towards green buildings

In his summer statement, Chancellor Rishi Sunak announced a billion-pound programme to help improve energy efficiency in schools, hospitals and other public buildings. Called ‘The Public Sector Decarbonisation Scheme’, the programme, which is part of UK’s efforts to reduce greenhouse gas emissions from the public sector by 50%, is expected to see substantial investments in energy efficiency and heating upgrades over the next year. ‘The Public Sector Decarbonisation Scheme’ is laudable in its objectives, as the world as a whole is dealing with an unprecedented ecological crisis. However, perhaps the first thing facilities managers should invest in when looking to improve energy efficiency is an instrument that allows them to accurately measure and record energy usage. Having an initial benchmark – before embarking on any changes and upgrades – is essential for measuring improvement and progress through time. A portable energy logger (PEL) like the Chauvin Arnoux PEL103 is the ideal tool for accurately monitoring power consumption and much more, including harmonic levels, voltage imbalance and power factor. In addition, by using a PEL103 across entire buildings and recording the results over time, facilities managers will be able to gain detailed and revealing insights into what’s actually contributing to their energy bills. A PEL103 can be installed quickly and easily in a distribution cabinet where it can, for example, monitor circuits for lighting, HVAC, display screens, computer systems and more. If it is to deliver its full range of benefits, the PEL should be set up to make recordings over time. A day is good, but a full week or even longer is likely to be even better, as interesting things often happen at weekends! For instance, according to a survey carried out by British Gas, up to 46% of the electrical energy used by SMEs was consumed outside normal business hours, so paying attention to those out-of-hours costs can yield big dividends. In case you’re wondering how monitoring energy efficiency actually works out in practice, Peter Halloway, Regional Sales Manager at Chauvin Arnoux describes how a recent project at a secondary school in Kent provided some eye-opening findings. “We were working on an energy efficiency project at a typical secondary school and we logged the measurements over an eleven-day period,” remembers Peter. “The period included the half term holidays, a week of term time and a weekend. The logged results revealed some very interesting statistics.” “The total energy consumed in the period came to just over £2,000, which correlated well with the school’s annual electricity bill of around seventy thousand pounds. But even at the weekend, when there was no activity on the premises, there was still a load of around 30 A per phase. Also, there was a phase imbalance that was producing an excessive current flow in the neutral.” Another important finding from the investigation was that harmonics were unexpectedly high, which is actually a common problem given the proliferation of non-linear loads in our fast-moving technological world. In this case, the data showed that the third- and fifth-order harmonics were dominant. Third-order harmonics are typically caused by personal computers, office equipment and electronic lighting, while in this installation the fifth-order harmonics were probably being caused by servers and UPS systems. “Having analysed the data we had recorded over the eleven-day period, we were able to recommend a solution that would balance the loads and explain how to reduce the harmonics by fitting filters,” Peter added. “An even simpler solution however would have been to educate staff to turn off lighting and equipment at the end of the day or even install systems to turn it off automatically. Relatively small changes like this will deliver big benefits over the years, giving organisations a golden opportunity to enhance their green credentials whilst simultaneously saving thousands of pounds. In short, a PEL is the right choice for kick-starting any organisation’s decarbonisation programme – and it’s a modest investment with the potential for delivering very big benefits!”

Why monitor the voltage?

Do you want to make your life easier when you’re carrying out energy surveys on your electrical systems? If so, here’s a suggestion you might not be expecting – don’t bother to monitor the voltage! That may seem an odd idea, but think about it for a moment. When you carry out energy surveys, what you’re really interested in is where energy is being used and how usage varies over time, rather than coming up with precise values for the energy usage. So, for energy survey purposes, making the assumption that your supply voltage is constant – which will not be far from the truth – is not going to affect the validity of your results. After all, it’s the current that goes up and down as equipment operates, the voltage is almost unaffected unless the load is enormous. But why would you decide not to monitor the voltage, since portable energy loggers (PELs) like our popular PEL103 always make provision for measuring both current and voltage? The answer comes down to convenience. Arranging to measure current is easy – you simply wrap the Rogowski coils that are used to sense current around the conductors and the job is done. There’s no need to make connections to live parts. Arranging to measure voltage is almost as easy, especially when magnetic probes that can be stuck to MCB screw heads or other convenient connection points are used. But there is a proviso – to measure voltage, you will either need to make connections to live parts or switch off the equipment while you’re making the connections. This is certainly not a deal breaker, but it can be real a nuisance, especially if you will be using your PEL to monitor energy usage at a lot of different locations. In almost all cases, measuring just the current will tell you everything you need to know for energy survey purposes. You’ll even be able to compare before and after current consumption to assess the effectiveness of energy saving measures you’ve put in place. And if you really do want to know about power rather than just current, you can easily export the current measurements recorded by your PEL to an Excel spreadsheet and multiply them all by your nominal supply voltage. But let’s be honest; there are times where you will definitely want to measure both voltage and current with your PEL, such as when you need to accurately determine the amount of energy used by a piece of equipment. However, for simple energy surveys, you can save yourself a useful amount of time and trouble by measuring just the current and letting the voltage look after itself! If you’d like to learn more about energy efficiency, then register for one of our regional seminars! 

Clicky